Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Install the exhaust pipe gasket. Align the tab on the gasket to face outward.
7. Install the exhaust pipe and the bolts (1, 2, and 3) to the exhaust manifold.
Tighten the bolts to 53 Nm (39 ft. lbs.).
8. Raise the vehicle.
9. Install the exhaust pipe heat shield bolts.
Tighten the bolts to 8 Nm (71 inch lbs.).
10. Install the charged air cooler outlet duct.
11. Install the wheelhouse panel.
12. Lower the vehicle.