Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Tighten the injector harness bracket bolts to 20 N.m (15 lb ft).
9.
Connect the cylinder number 7 injector harness connector.
10.
Install the injector harness to the bracket as shown.
11.
Install the fuel filter assembly.
12.
Install the fuel filter assembly bolts.
Tighten
Tighten the fuel filter assembly bolts to 20 N.m (15 lb ft).
13.
Connect the negative battery cables. Refer to Service Information (SI) for the Battery Negative Cable Disconnect/Connect Procedure (Single
Battery) and Battery Negative Cable Disconnect/Connect Procedure (Auxiliary Battery).
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.