Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Tighten the EBCM bracket bolts (4).
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
7. Lower the vehicle.
8. Install the fuel line bracket to the stud.
9. Install the fuel line bracket nut.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
10. Connect the fuel feed and return lines.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine. If the engine stalls, repeat the above step.
13. Once the engine starts, inspect for fuel leaks.
Fuel Hose/Pipes Replacement - (Cab/Chassis - W/Balance Pump)
FUEL HOSE/PIPES REPLACEMENT - CHASSIS (CAB/CHASSIS W/BALANCE PUMP)
REMOVAL PROCEDURE
