Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
4. Working through the left wheelhouse, loosen the charged air cooler inlet duct clamp (3) at the charged air cooler.
5. Remove the left charged air cooler inlet duct.
Installation Procedure
1. Important: Lubricate the end of the duct prior to installation.
Working through the left wheelhouse, install the charged air cooler inlet duct.
2. Hand tighten the left charged air cooler inlet duct clamp (3) at the charged air cooler.
3. Important: Lubricate the end of the duct prior to installation.
Install the left charged air cooler outlet duct to the intake.
Notice: Refer to Fastener Notice in Service Precautions.
