Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Remove the starter lead nut.
9. Remove the auxiliary positive battery cable from the starter stud.
10. Remove the auxiliary positive battery cable.
INSTALLATION PROCEDURE
1. Install the auxiliary positive battery cable.
2. Install the auxiliary positive battery cable to the starter stud.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the starter lead nut.
Tighten
Tighten the nut to 9 N.m (80 lb in).