Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Lower the control valve assembly (1) to clear the dowel pins (2) in the main housing.
9. Move the control valve assembly (4) sideways to disengage pin (1) in the manual selector valve (2) from the slot in detent lever (3). Remove the
control valve assembly (4).
Installation Procedure
1. Move the control valve assembly (4) into position under the main housing. Engage the pin (1) in the manual selector valve (2) into the slot in the
detent lever (3).
