Silverado Classic 1500 2WD V6-4.3L (2007)
1. Position the recliner handle on the side shield.
Notice: Refer to Fastener Notice .
2. Install the screw retaining the recliner handle to the trim panel.
Tighten the screws to 2 N.m (18 lb in).
Front Seat Back Hinge and Recliner Mechanism Replacement
Front Seat Back Hinge and Recliner Mechanism Replacement
Removal Procedure
1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
3. Remove the seat cushion frame. Refer to Front Seat Cushion Frame Replacement .
4. Remove the seat back frame. Refer to Front Seat Back Frame Replacement .
5. Remove the outboard pivot bolt.
6. Remove the bolts holding the seat back folding mechanism.
7. Unsnap the recliner cable (1) from the folding mechanism (3).