Silverado Classic 1500 2WD V6-4.3L (2007)
2. Reposition the radiator inlet hose clamp at the radiator.
3. Install the radiator inlet hose to the thermostat housing.
4. Reposition the radiator inlet hose clamp at the thermostat housing.
5. Place the radiator inlet hose onto the support.
6. Align the hinge clip with the lip on the throttle body. Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and
resonator downward until the mounting stud is through the hole in the air inlet tube.
7. Install the resonator retaining wing nut.
8. Connect the PCV hose to the air cleaner outlet duct.
