Silverado Classic 1500 2WD V6-4.3L (2007)
3. Install the radiator outlet hose to the water pump.
4. Install the radiator outlet hose to the surge tank.
5. Reposition the radiator outlet hose clamps at the surge tank and water pump.
6. Align the hinge clip with the lip on the throttle body. Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and
resonator downward until the mounting stud is through the hole in the air inlet tube.
7. Install the resonator retaining wing nut.
8. Connect the PCV hose to the air cleaner outlet duct.
