Silverado Classic 1500 2WD V6-4.3L (2007)
10. Notice: Completely engage the J 38606 jaws on the valve spring. The J 38606 may slip off and scratch the valve spring. Replace the valve spring
if the valve spring becomes scratch.
Use the J 38606 if the clearance does not permit use of the J 5892-D.
11. Install the valve stem O-ring seal.
12. Install the valve stem keys. Use grease in order to hold the valve stem keys in place.
13. Carefully release the valve spring pressure, making sure the valve stem keys stay in place.
14. Notice: The valve stem keys must correctly seat in the valve spring cap. Engine damage may occur by not installing properly.
Remove the J 5892-D or the J 38606.
1. Look to ensure that the valve stem keys seat properly in the upper groove of the valve stem.
2. Tap the end of the valve stem with a plastic faced hammer in order to seat the valve stem keys, if necessary.
15. Remove the J 22794.
16. Install the spark plugs.
17. Install the valve rocker arms.
