Silverado Classic 1500 2WD V6-4.3L (2007)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the air cleaner outlet resonator clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
2. Remove the outlet resonator from the MAT/IAT sensor.
3. Loosen the air cleaner cover screws.
4. Remove the air cleaner cover.
5. Remove the air cleaner element.
INSTALLATION PROCEDURE
1. Insert the air cleaner element.
2. Install the air cleaner cover.
NOTE: Refer to Fastener Notice.
3. Tighten the air cleaner cover screws until snug.