Silverado Classic 1500 2WD V6-4.3L (2007)
1. Install the MAF/IAT sensor.
NOTE: Refer to Fastener Notice.
2. Tighten the MAF/IAT sensor clamp at the air cleaner box.
Tighten the clamp to 4 N.m (35 lb in).
3. Install the air cleaner outlet duct to the MAF/IAT sensor.
4. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
Tighten the clamp to 4 N.m (35 lb in).
5. Connect the MAF/IAT sensor electrical connector (4).