Silverado Classic 1500 2WD V6-4.3L (2007)
11. Install the J 44466-12 (2) and the J 44466-13 (1) to the metering body and tighten.
12. Install the J 44466-11, retainer, and J 44466-13 to the fuel feed pipe and tighten.
13. Obtain the J 41413, close the valve (2) on the tank (3), and remove the regulator assembly.
14. Install the J 44466-10 (5) to the J 41413 tank (3)
15. Connect the J 44466-10 hose (1) to the J 44466-12 (3).
16. Install the J 39021, the J 39021-210 and J 39021-301 (4) to the metering body electrical connector.
17. Adjust the amperage selector switch on J 39021 to 0.5 amps.