Silverado Classic 1500 2WD V8-5.3L (2007)
Seat Back: Service and Repair
Front Seat Back Hinge and Recliner Mechanism Replacement
Front Seat Back Hinge and Recliner Mechanism Replacement
Removal Procedure
1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
3. Remove the seat cushion frame. Refer to Front Seat Cushion Frame Replacement .
4. Remove the seat back frame. Refer to Front Seat Back Frame Replacement .
5. Remove the outboard pivot bolt.
6. Remove the bolts holding the seat back folding mechanism.
7. Unsnap the recliner cable (1) from the folding mechanism (3).
8. Remove the front recliner attachment bolts (4).
9. Remove the recliner screw (5).
10. Remove the U-channel (1).
11. Remove the drive cable, if equipped with a power recliner.
12. Disconnect the recliner cable from the recliner mechanism.
13. Remove the recliner from the seat frame.