Silverado Classic 1500 2WD V8-5.3L (2007)
Seat Cushion: Service and Repair
Seat Cushion Trim Cover and Pad Replacement
Seat Cushion Trim Cover and Pad Replacement
Removal Procedure
1. Remove the front nuts (2) on the underside of the seat cushion.
2. Remove the front seat trim panel. Refer to Front Seat Trim Panel Replacement .
3. Unsnap the lumbar cable (6). Disconnect the lumbar wire harness if equipped with power lumbar.
4. Disconnect the electrical connectors.
5. Remove the pressure sensor (2) from the front passenger seat frame, if equipped with the Inflatable Restraint Passenger Presence System.
6. Lift the seat cushion up off the rear plastic holders (1) on the underside of the seat cushion, and pull forward.
7. Remove the seat switch bezel. Refer to Seat Switch Bezel Replacement .