Silverado Classic 1500 2WD V8-5.3L (2007)
8. Remove the brake hose to caliper bolt.
9. Remove and discard the 2 copper brake hose gaskets. These gaskets may be stuck to the caliper or the brake hose end.
10. Remove the brake hose from the caliper.
11. Remove the brake caliper bolts.
12. Caution: Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system
may result. If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
Remove the caliper from the caliper bracket.
Installation Procedure
