Silverado Classic 1500 2WD V8-5.3L (2007)
Brake Pad: Service and Repair
Rear
Rear Disc Brake Pads Replacement (1500 Series)
Caution: Refer to Brake Dust Caution.
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear tire and wheel.
3. Important:
^
DO NOT use any air tools to remove the guide pin bolts. Use hand tools only.
^
Install a open end wrench to hold the caliper guide pin line with the brake caliper while removing or installing the caliper guide pin bolt. DO
NOT allow the open end wrench to come in contact with the brake caliper. Allowing the open end wrench to come in contact with the brake
caliper will cause a pulsation when the brake are applied.
Using a open end wrench to hold the guide pin, loosen the guide pin bolt.
