Silverado Classic 1500 2WD V8-5.3L (2007)
3. Install the coolant air bleed pipe (2) and gaskets (3) onto the cylinder heads.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the coolant air bleed pipe bolts/studs (1).
Tighten the bolts/studs to 12 Nm (106 inch lbs.).
5. Install the coolant air bleed pipe covers (2) and bolts (1).
Tighten the bolts to 12 Nm (106 inch lbs.).
6. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).