Silverado Classic 1500 4WD V8-4.8L (2007)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts.
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. Install the engine mount-to-engine mount bracket bolts.
Tighten the engine mount-to-engine mount bracket bolts to 65 Nm (48 ft. lbs.).
6. Install the exhaust manifold.
7. Install the inner wheelhouse panel.
8. Install the tire and wheel.
9. Install the engine protection shield, if equipped.
10. Lower the vehicle.