Silverado Classic 1500 4WD V8-4.8L (2007)
Vehicle Lifting: Service and Repair
Vehicle Lifting
Vehicle Lifting
* Ensure that the lifting equipment meets weight requirements and is in good working order. Always follow the lift manufacturer's instructions.
* You may lift and support the front of the vehicle at the front suspension near the wheel assemblies. Ensure that the arms of the front cradle are
extended as close to the steering knuckle as possible.
* Ensure that the vehicle is centered on the hoist before attempting to lift.
* When using a suspension-contact hoist, ensure that the rear cradle has adequate clearance for the rear stabilizer bar.
* When lifting or jacking a vehicle, be certain that the lift pads do not contact the exhaust system, brake pipes, cables, HVAC lines, wiring
harnesses, fuel lines, or underbody. Such contact may result in damage or unsatisfactory vehicle performance.
* When using a frame-contact hoist, only place the pads on flat surfaces. Do not place pads within 50 mm (2 in) of any radius.
* Before lifting the vehicle, verify that the vehicle loads are secure and equally distributed.
* When major components are removed from the vehicle when supported on a hoist, support the vehicle with jack stands at the opposite end from
which the components are being removed and secure the vehicle frame to the hoist pads nearest the component to be removed.
