Silverado Classic 1500 4WD V8-4.8L (2007)
Idler Arm: Service and Repair
Idler Arm Replacement
Tools Required
^
J 24319-B Universal Steering Linkage Puller
^
J 29193 Steering Linkage Installer (12 mm)
^
J 29194 Steering Linkage Installer (14 mm)
Removal Procedure
Notice:
Do not attempt to free the ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use the proper tool to
separate all ball joints.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the engine protection shield, if equipped.
3. Remove the idler arm ball stud nut (10). Do not reuse the idler arm ball stud nut.
4. Remove the idler arm from the relay rod using the J 24319-B.
5. Remove the idler arm frame bolts (3) and the nuts (1).
6. Remove the idler arm (2) from the vehicle.