Silverado Classic 1500 4WD V8-4.8L (2007)
1. Install the stud.
2. Install the 4 washers and the lug nut to the stud.
3. Tighten the lug nut in order to draw the stud into the flange until the stud fully seats.
4. Remove the lug nut and the washers.
5. Install the axle shaft for the vehicles with 9.5 in ring gear.
6. Install the rear hub assembly for the vehicles with 10.5/11.5 in ring gear, with single wheels.
7. Install the rear axle hub for vehicles with dual wheels.
8. Install the rotor, except dual wheels.
9. Install the tire and wheel.
10. Remove the safety stands.
11. Lower the vehicle.
