Silverado Classic 2500 2WD V8-6.0L (2007)
2. Remove the cardboard from between the seat back cover and the foam pad.
3. Engage the hook, and the loop strips that retain the seat back cover (2).
4. Engage the J-clips that retain the seat back cover.
5. Install the head restraints (1) to the seat back. Refer to Head Restraint Replacement .
6. Install the armrest to the seat back, if removed. Refer to Rear Seat Armrest Replacement (60/40 Split) .
7. Install the seat back folding cover, if removed.
8. Install the rear seat to the vehicle. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat Replacement
(Extended Cab w/4th Door) .
Rear Seat Back Cushion Frame Replacement
Rear Seat Back Cushion Frame Replacement
Removal Procedure
1. Remove the seat from the vehicle. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat Replacement
(Extended Cab w/4th Door) .
2. Remove the armrest, if equipped. Refer to Rear Seat Armrest Replacement (60/40 Split) .
3. Partially remove the seat-back cover in order to gain access to the retaining bolts. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
4. Remove the bolts from the seat-back frame.
5. Remove the seat-back frame (4) from the seat back cushion frame.
Installation Procedure
1. Install the seat-back frame (4) to the seat cushion frame.
Notice: Refer to Fastener Notice .
2. Install the bolts which retain the seat-back frame to the seat cushion frame.
Tighten the bolts to 35 N.m (26 lb ft).
3. Install the seat-back cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
4. Install the armrest to the seat back. Refer to Rear Seat Armrest Replacement (60/40 Split) .
5. Install the seat to the vehicle. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat Replacement