Silverado Classic 2500 2WD V8-6.0L (2007)
Canister Vent Valve: Service and Repair
Evaporative Emission Canister Vent Solenoid Valve Replacement (Cab/Chassis)
Evaporative Emission Canister Vent Solenoid Valve Replacement (Cab/Chassis)
REMOVAL PROCEDURE
IMPORTANT: Clean all evaporative emission (EVAP) connections and surrounding areas before disconnecting the line in order to avoid
possible EVAP system contamination.
1. Disconnect the EVAP canister vent solenoid (CVS) electrical connector (1).
2. Remove the EVAP CVS valve bracket bolt (1).
3. Remove the EVAP CVS line from the clips on the fuel tank.
4. Remove the CVS valve and line.
5. Remove the EVAP CVS valve line from the CVS, if necessary.
INSTALLATION PROCEDURE