Silverado Classic 2500 2WD V8-6.0L (2007)
16. Disconnect the brake lines from the brake pressure modulator valve (BPMV).
17. Remove the bolts (4) attaching the EHCU bracket to the frame (5).
18. Remove the EHCU (1).
19. If equipped with 4WD, remove the torsion bar bracket.
20. Disconnect the fuel and EVAP lines at the fuel tank.
21. Cap the fuel and EVAP lines at the fuel tank in order to avoid possible system contamination.
22. Remove the fuel and EVAP bundle clip nuts.
23. Remove the fuel and EVAP bundle.
INSTALLATION PROCEDURE
