Silverado Classic 2500 2WD V8-6.0L (2007)
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the output speed sensor (2) electrical connector.
3. Remove the output speed sensor bolt.
4. Remove the output speed sensor (2).
5. Inspect the output speed sensor (2) for any evidence of damage.
Installation Procedure
1. Lubricate the output speed sensor seal with automatic transmission fluid.
2. Install the output speed sensor (2).
Notice:
Refer to Fastener Notice.
3. Install the output speed sensor bolt.