Silverado Classic 2500 2WD V8-6.0L (2007)
4. Install the ground, then the washer and then the bolt to the frame.
Important:
It is important to use the bolts, washers and nuts specified in this bulletin. These parts have been identified due to their conductive finish.
5. Install a washer and nut to the back side of the frame.
Tighten
Tighten the nut to 9 Nm (79 lb in).
6. Cover the front and back side of the repair area using Rubberized Undercoating.
An additional check can be made to ensure a good connection for the battery cable to frame ground. It is possible for this ground to cause similar
symptoms with the ABS as described above.
*We believe this source and their products to be reliable. There may be additional manufacturers of such products/materials. General Motors does not
endorse, indicate any preference for or assume any responsibility for the products or material from this firm or for any such items that may be available
from other sources.
Parts Information
Warranty Information
Disclaimer
