chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Power Steering Cooler Pipe/Hose Replacement (Rack and Pinion)|Page 16013 > < Power Steering Cooler Pipe/Hose Replacement (Rack and Pinion)|Page 16011

Silverado Classic 2500 2WD V8-8.1L (2007)

Page 2
background image

2. Connect the power steering outlet hose (3) to the power steering gear (4).
3. Install the retaining clamp.
4. Connect the power steering inlet hose to the power steering pump.
5. Install the retaining clamp.
6. Bleed the power steering system. Refer to Power Steering System Bleeding.
7. Inspect all the hose connections for leaks.
8. Install the front grille. Refer to Grille Replacement (Chevrolet) Grille Replacement (GMC).

Power Steering Cooler Pipe/Hose Replacement (Rack and Pinion)|Page 16013 > < Power Steering Cooler Pipe/Hose Replacement (Rack and Pinion)|Page 16011