Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
will remain displayed after being reset.
3. If a trip information parameter is being displayed, pressing the DIC Trip Information button will display the next trip information parameter.
4. If the next Trip Information parameter to be displayed is Timer, Hourmeter, or blank, pressing the reset stem will return the display to the
Odometer.
Odometer
The odometer is capable of displaying values from 0-999,999 mi or km.
If the ignition is in the OFF or UNLOCK/ACC position, the odometer can be displayed by pressing the trip reset stem. The odometer will remain
displayed for 5 seconds.
Trip Odometers
The DIC can display Personal Trip or Business Trip odometers.
The trip odometers are capable of displaying values from 0-999999.9 mi or km.
When the maximum value is reached, the trip odometer will roll over to 0.0.
Timer
The Timer is displayed as XX (hours) : XX (minutes) : XX (seconds).
The Timer is started and stopped using the DIC Select button.
Holding the Select button for longer than 1 second while the Timer parameter is displayed will reset the Timer to 00:00:00.
The Timer status and data value is retained in memory when the ignition is turned OFF. When the ignition is turned ON again, the Timer status and data
value is resumed.
The Timer maximum value is 99:59:59. When the maximum is reached, the Timer rolls over to 00:00:00 and continues to operate.
Tire Pressures
The tire pressure mode can display individual tire pressures. The tire pressure mode is accessed by pressing the trip information button, where TIRE
PRESSURES will be displayed. Pressing the select button will scroll through the individual tires: LF TIRE, RF TIRE, LR TIRE, and RR TIRE. Pressure
will be in pounds per square inch (psi) or in kilopascals (kPa).
Fuel Information
DIC Fuel Information/Reset Capabilities
The available driver information center (DIC) Fuel Information and reset capabilities are as follows:
* Range - Can not be reset
* Avg. Fuel Economy - Can be reset
* Inst. Fuel Economy - Can not be reset
* Engine Oil Life - Can be reset
Range
The range display is the estimated distance that the vehicle can travel under current fuel economy and fuel level conditions.
This range is calculated from odometer information and class 2 messages.
Fuel Range is capable of displaying values from 0-999 mi or km.
Display appears as: RANGE: XXX MILES (English), RANGE: XXX km (Metric).
If the range is less than 40 miles, RANGE: LOW will be displayed.
Average Fuel Economy
The Average Fuel Economy (AFE) value is calculated by the cluster based on Trip Distance and Trip Fuel Used.
