Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Passenger Assist Handle: Service and Repair
Roof Rail Rear Assist Handle Replacement
Roof Rail Rear Assist Handle Replacement
Removal Procedure
1. Remove center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement .
2. Remove the assist handle retraining screws.
3. Remove the assist handle from the vehicle.
Installation Procedure
1. Install the assist handle to the vehicle.
Notice: Refer to Fastener Notice .
2. Install the assist handle screws.
Tighten the screws to 6 N.m (53 lb in).
3. Install the center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement .