Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Trim Panel: Service and Repair
Rear Quarter Trim Panel Replacement (Crew Cab)
Rear Quarter Trim Panel Replacement (Crew Cab)
Removal Procedure
1. Remove the coat hook, if required. Refer to Coat Hook Replacement .
2. Remove the rear window lower molding. Refer to Rear Window Lower Garnish Molding Replacement .
3. Remove the quarter panel trim screws.
4. Remove the lower seat belt anchor bolt in order to guide the seat belt through the trim panel.
5. Remove the quarter panel.
Installation Procedure
1. Install the seat belt through the trim panel.
2. Install the quarter panel.
Notice: Refer to Fastener Notice .
3. Install the lower seat belt anchor bolt.
Tighten the bolt to 53 N.m (39 lb ft).
4. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
5. Install the rear window lower molding. Refer to Rear Window Lower Garnish Molding Replacement .
6. Install the coat hook, if removed. Refer to Coat Hook Replacement .