Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Parking Brake Cable: Service and Repair
Parking Brake Front Cable Replacement
Parking Brake Front Cable Replacement
Removal Procedure
1. Release the park brake.
2. Remove the park brake pedal.
3. Roll the carpet back to access cable grommet.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Disengage the grommet and the cable from the floor pan.
6. Disconnect the front cable from the intermediate cable.
7. Remove the cable from the body mount by depressing the retaining tabs.
8. Remove the cable.
Installation Procedure