Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement - Upper Right Side
Valve Rocker Arm Cover Replacement - Upper Right Side
Removal Procedure
1. Remove the intake manifold cover.
2. Remove the air cleaner outlet duct.
3. Using a pick or a small flat-bladed screwdriver, remove and discard the quick connect fitting clip from the charged air cooler outlet duct.
4. Remove the charged air cooler outlet duct from the intake.
5. Remove the exhaust gas recirculation (EGR) cooler tube.
6. Remove the heater outlet hose bolt from the bracket.
7. Position the heater outlet hose out of the way.
8. Remove the wiring harness retainer from the bracket.
