Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Engine Mount: Service and Repair
Engine Mount Replacement - Left
Engine Mount Replacement - Left Side
Removal Procedure
1. If RWD vehicle, raise the vehicle to a height to work through the front wheelhouse opening. Refer to Lifting and Jacking the Vehicle.
2. If 4-wheel drive (4WD) vehicle, raise the vehicle in order to remove the front tires and wheels and support with jackstands.
3. Remove the left front tire and wheel.
4. Remove the pushpins holding the left front fender wheelhouse inner panel (1).
5. Remove the wheelhouse inner panel.
6. Notice: Refer to Engine Mounting Notice.
Working through the wheelhouse opening remove the 3 bolts retaining the engine mount to the engine mount frame bracket.
7. Remove the oil pan skid plate, if equipped.
