Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Tighten the mounting bracket bolts to 50 Nm (37 ft. lbs.).
9. Install the 3 bolts holding the engine mount to the engine mount frame bracket.
Tighten the engine mount to engine mount frame bracket bolts to 65 Nm (48 ft. lbs.).
10. If RWD vehicle with an automatic transmission, install the bolt for the transmission oil cooler line bracket.
Tighten the transmission oil cooler line bracket bolt to 9 Nm (80 inch lbs.).
11. Install the engine protection shield and bolts.
Tighten the engine protection shield bolts to 20 Nm (15 ft. lbs.).
12. Install the oil pan skid plate.
Tighten the bolts to 20 Nm (15 ft. lbs.).
13. Install the right front tire and wheel.
