Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the right wheelhouse panel.
3. Disconnect the crankshaft position (CKP) sensor electrical connector.
4. Remove the CKP sensor bolt.
5. Remove the CKP sensor.
6. If necessary, remove the CKP sensor spacer bolts.
7. If necessary, remove the CKP sensor spacer.
INSTALLATION PROCEDURE
