Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
1. Apply sealant to the threads of the oil pressure sensor. Refer to Sealers, Adhesives, and Lubricants for the correct part number.
Notice: Refer to Fastener Notice in Service Precautions.
2. Using J 41712, install the oil pressure sensor (1).
Tighten the sensor to 30 Nm (22 ft. lbs.).
3. Connect the oil pressure sensor electrical connector.
4. Install the left wheelhouse inner panel.
5. Check and add engine oil if necessary.