Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Fuel Injector: Service and Repair
Fuel Injector Replacement (Right)
FUEL INJECTOR REPLACEMENT (RIGHT)
TOOLS REQUIRED
-
EN-47909 Injector Bore and Sleeve Cleaning Kit
-
J-46594 Fuel Injector Puller
REMOVAL PROCEDURE
1. Remove the air cleaner outlet duct.
2. Using a pick or a small flat-bladed screw driver, remove and discard the quick connect fitting clip from the charged air cooler outlet duct.
3. Remove the charged air cooler outlet duct from the intake.
4. Remove the fuel filter and bracket.
