Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
19. Install the fuel feed pipe.
20. Install the fuel feed pipe nut/bolt.
Tighten the nut/bolt to 25 N.m (18 lb ft).
21. Install the banjo bolt and washer to the fuel injection control module.
Tighten the bolt to 40 N.m (29 lb ft).
22. Position the A/C compressor aside.
23. Install the A/C compressor bolts.
Tighten the bolts to 50 N.m (37 lb ft).
24. Install the PCV hose/pipe.
