Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
5. Install the bracket.
NOTE: Refer to Fastener Notice.
6. Install the oil level indicator tube bracket bolts.
Tighten the bolts to 21 N.m (15 lb ft).
7. Install the oil level indicator tube bolt.
Tighten the bolt to 21 N.m (15 lb ft).
8. Install the wiring harness retainer to the bracket.
9. Prime the fuel system. Refer to Fuel System Priming.
10. Start the engine. If the engine stalls, repeat the above step.
11. Once the engine starts, inspect for fuel leaks.
Fuel Return Hose Replacement - Fuel Return Pipe to Fuel Injection Pump
FUEL RETURN HOSE REPLACEMENT - FUEL RETURN PIPE TO FUEL INJECTION PUMP
REMOVAL PROCEDURE