Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
3. Position the fuel hose clamps (1) at the injection pump as required.
4. Connect the fuel hoses to the return/feed line as required.
5. Position the fuel hose clamps (1) at the return/feed line as required.
6. Install the intake manifold tube.
7. Install the water outlet.
8. Prime the fuel system. Refer to Fuel System Priming.
9. Start the engine. If the engine stalls, repeat the above step.
10. Once the engine starts, inspect for fuel leaks.
Fuel Hose/Pipes Replacement - Chassis (Cab/Chassis w/Balance Pump)
FUEL HOSE/PIPES REPLACEMENT - CHASSIS (CAB/CHASSIS W/BALANCE PUMP)
REMOVAL PROCEDURE