Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Tighten the bolts to 25 N.m (18 lb ft).
3. Connect the right fuel rail feed pipe fittings (1, 3).
Tighten the fittings to 41 N.m (30 lb ft).
4. Install the EGR cooler tube.
5. Install the water outlet.
6. Install the engine wiring harness.
7. Prime the fuel system. Refer to Fuel System Priming.
8. Start the engine. If the engine stalls, repeat the above step.
9. Once the engine starts, inspect for fuel leaks.