Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
IMPORTANT: The clamp for the air intake pipe uses reverse threads.
3. Tighten the air intake pipe to turbocharger clamp (1).
Tighten the clamp to 4.6 N.m (41 lb in).
4. Install the engine wire harness clamp bolt.
Tighten the bolt to 10 N.m (89 lb in).
5. Connect the turbocharger electrical connector.
6. Install the PCV hose/pipe.
7. Install the air cleaner outlet duct.
8. Install the intake manifold cover.
