Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Turbocharger Air Intake Tube: Service and Repair
Charged Air Cooler Hoses/Pipes Replacement (Driver Side)
Charged Air Cooler Hoses/Pipes Replacement (Driver Side)
Removal Procedure
1. Remove the left wheelhouse panel.
Important: After removing the charged air cooler duct, cover the turbocharger opening with tape in order to prevent entry of objects.
2. Loosen the left charged air cooler inlet duct connector to turbocharger clamp (1).
3. Important: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.
Remove the left charged air cooler inlet duct connector (4) from the turbocharger.
4. Working through the left wheelhouse, loosen the charged air cooler inlet duct clamp (3) at the charged air cooler.
5. Remove the left charged air cooler inlet duct.
Installation Procedure
