Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Battery Tray: Service and Repair
Battery Tray Replacement
Battery Tray Replacement
Removal Procedure
1. Remove the battery.
2. Remove the battery tray bolts (2) from the battery tray reinforcement.
3. Remove the battery tray bolts (1) from the fender inner panel.
4. Remove the battery tray bolts (1) from the battery tray support.
5. Remove the battery tray.
Installation Procedure
1. Install the battery tray.
Notice: Refer to Fastener Notice.
2. Install the battery tray bolts (1) to the battery tray support.
Tighten the bolts to 9 N.m (80 lb in).