Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Bell Housing: Service and Repair
Engine Flywheel Housing Replacement
Tools Required
^
J 37228 Seal Cutter
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).
2. Remove the crankshaft rear oil seal.
3. Remove the turbocharger oil return pipe nuts from the top of the flywheel housing.
4. Remove the upper oil pan.
5. Remove the oil filter.