Silverado Classic 3500 2WD V8-6.0L (2007)
6. Install the lower bolts to the rear of the fender.
Tighten the bolts to 9 N.m (80 lb in).
7. Install the bolts in order to retain the fender to the rear pillar.
Tighten the bolts to 9 N.m (80 lb in).
8. Install the rear tail lamp assembly to the vehicle. Refer to Tail/Turn Signal Lamp Replacement (Except Stepside) .
9. Install the bolts to the front of the fender.
Tighten the bolts to 17 N.m (13 lb ft).
10. Install the fuel filler neck to the vehicle, if removed. Refer to Fuel Tank Filler Door Replacement .
