Silverado Classic 3500 2WD V8-6.0L (2007)
5. Attach the seat trim cover to the seat cushion frame.
6. Install the lumbar actuator (5).
7. Install the seat switch bezel. Refer to Seat Switch Bezel Replacement .
8. Place the cushion on the rear plastic holders (1) on the underside of the seat cushion, and push rearward.
9. Connect the lumbar cable to the underside of the seat cushion (6). Connect the lumbar wire harness, if equipped with power lumbar.
10. Install the pressure sensor (2) to the front passenger seat frame, if equipped with the Inflatable Restraint Passenger Presence System.
11. Connect the electrical connectors.
