Silverado Classic 3500 2WD V8-6.0L (2007)
2. Install the rear brake shoes.
3. Install the park brake cable through the frame bracket and guides.
4. Install the left rear park brake cable (3) to the equalizer bar.
5. Lower the vehicle.
6. Adjust the park brake. Refer to Park Brake Adjustment (w/Rear Disc) Park Brake Adjustment (w/Rear Drum).
Parking Brake Rear Cable Replacement - Right Side (Disc Brakes)
Parking Brake Rear Cable Replacement - Right Side (Disc Brakes)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Release the park brake.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and
removing the right park brake cable from the equalizer bar.
