Silverado Classic 3500 2WD V8-6.0L (2007)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement - Right Side
Exhaust Manifold Replacement - Right Side (4.8L, 5.3L, and 6.0L Engines)
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the exhaust manifold pipe nuts.
3. Lower the vehicle.
4. Remove the spark plugs.
5. Remove the exhaust manifold bolts, manifold, and gasket.
6. Discard the gasket.
7. Remove the heat shield bolts (1), and shield (2) from the exhaust manifold (1), if necessary.
8. Clean and inspect the exhaust manifold. Refer to Exhaust Manifold Cleaning and Inspection.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.